Cord Statement Necklace

Who doesn’t love a good statement necklace? I am, so I’m always trying to find new ways to make one! This time I used cord in 3 different colors. Read on to see how to make this DIY statement necklace!

_DSC0128αedited

Here are the materials I used for this statement necklace:
-cotton cord (rope) in 3 different colours
-glue
-magnetic clasp
-faux stone cabochon
-flat aluminium wire
_DSC0105

Start by placing the cords the way you like. The two smaller pieces were the same length and I used the black one as the primary color. It’s hard to keep them in place so add a dab of glue between them to make it easier.

_DSC0107

Then cut two pieces of your wire and use it to wrap the cords together so they stay together. You can wrap that wire with your hands, it’s very flexible. Just make sure to tack the ends nicely at the back using pliers.

_DSC0108

Now glue the cabochon in the middle.

_DSC0109

Finally you’ll need to glue the clasp. The ends of this cord fray easily so to be able to fit them in the clasp a good trick is to cover them with some tape first.

_DSC0111

Glue them, let it dry and you are ready!

_DSC0112

Now go ahead and wear your new necklace! Be happy!

_DSC0127edited

Share this if you love it:

Double Chain Beaded Bracelet!!!!

chain beaded bracelet tutorial

If you love chains and beads, then double chain beaded bracelet is just perfect for you. Let’s see how to create it!

diy chain beaded bracelet materials

Jewelry making supplies  for double chain beaded bracelet:

– Agate Beads (7 beads of 8mm)
– Gold Plated Stardust Beads (2 beads of 4mm)
– Gold Plated Chain
– Gold Plated Clasp
Jump Rings ( two different sizes because the  chain has small rings)
– Gold Plated Crimps
– Jewelry wire in gold tones
– Plier Set

diy free jewelry making tutorial agate bracelet

tutorial double layer gold chain bracelet

Step 1: Let’s start now building the bracelet and specifically with the beaded part. First cut a piece of jewelry wire and use a crimp on the end to create a loop.

pink agate chain bracelet craft

Start with the stardust bead and then add the agate beads and end it again with the second stardust bead. Use the second crimp and make a loop.

free jewelry bracelet tutorial

The beaded part is ready.

diy beaded bracelet jewelry craft

Step 2: Proceed now making the chain part. Measure your wrist and then try to cut a piece of the gold plated chain that the half of it combined with the beaded part will be almost equal to your wrist’s length.

double gols plated chain bracelet tutorial

Pleat the chain in the middle and pass the small jump ring. Connect the first jump ring with the second larger one. Repeat the same step on the second end of the chain.

diy gem stone beaded bracelet

Connect the first end of the chain with the beaded part.

tutorial how to add lobster on bracelet

and add on the free end of the beaded part the lobster. In order to do this, just use a jump ring.

diy double gold chain and agate beaded bracelet

The bracelet actually is ready! Just have in mind to choose a lobster that will feet perfectly with the rest of the jewel and it will look as a really beautiful detail of the bracelet.

how to create a gold chain beaded chic bracelet

Enjoy it wearing alone or with more beautiful chain or beaded bracelets. I love the combination of yellow gold with hot pink…what about you? And you know what is the best part of this bracelet? That looks different from every side… same bracelet, different styles!

Happy Crafting!

Share this if you love it:

Button and Bead Bar Necklace DIY!!!!

Button and Bead Bar Necklace DIY!!!!

Button and Bead Bar Necklace DIY tutorial to share with you guys!

What I adore is to create jewels with common and uncommon materials. For example, have you ever thought that buttons can be combined beautifully with gemstone beads creating a dainty bar necklace? Let’s see how to create this horizontal bar necklace and I bet it’s perfect to wear it alone or stack it with more gorgeous necklaces.

materials for Button and Bead Bar Necklace DIY!!!!

Materials needed for Button Beaded Bar Necklace:
Craft Buttons
Gemstone beads ( I have used a large bead from white volcanic lava and two beads from lilac agate)
Gold Plated Chain
Eyepin
Gold Plated jump Rings
Gold Plated Round Lobster
Plier Set
Button and Bead Bar Necklace DIY!!!!

Step 1: Let’s prepare the beaded part of the jewel. In case you do not have an eyepin (like I did) just cut the ends of the pin you have and create with the round nose plier two rings.

Button and Bead Bar Necklace DIY!!!!

Pass the beads and the buttons in the pin ( I have passed the lilac agate, then two wooden buttons, then the lava bead and then the two buttons and and the lilac agate bead again) and your bar is ready!

Button and Bead Bar Necklace DIY!!!!

 

Step 2: Cut a piece of the chain in a length smaller than the desired final length (just do not forget that lobster and jump rings and the beaded bar will add more length in your jewel). Use a jump ring and connect the beaded bar with the gold plated chain. Repeat this for both ends.

Button and Bead Bar Necklace DIY!!!!

 

Step 3: Check where is the middle of the chain and cut it. Use again two jump rings to connect the chain with round lobster (or any lobster).

Button and Bead Bar Necklace DIY!!!!

 

The pretty horizontal bar necklace is ready!

Button and Bead Bar Necklace DIY!!!!

Button and Bead Bar Necklace DIY!!!!

What do you think? I think that buttons were combined so beautiful with the gems! And when you wear it…none will realize that you have buttons on your beaded bar necklace!

 

Happy Crafting!!!!

Share this if you love it:

How to Make Beaded Flower Earrings Tutorial with Simple Beading Techniques

Summary: Wonder how to make beaded earrings tutorial? Please check out this tutorial, which is totally about beaded flower earring patterns.

Jewelry making . diy jewelry , diy earrings

How to Make Beaded Flower Earrings Tutorial with Simple Beading Techniques

If you enjoy beading jewelry, we believe you will fall in love with this pair of beaded flower earrings. The beaded flower earring patterns are made out of crystal beads and seed beads. Now, let’s begin to learn how to make beaded earrings tutorial!

Materials needed on how to make beaded earrings tutorial:

2MM Round Seed Beads
6MM Abacus Glass Beads
Drop Glass Beads
Earring Hooks
Tiger Wire

Instructions for beaded flower earring patterns:

Step 1: Make the dangle for the beaded flower earrings patterns

1st, cut off about 70cm tiger wire, slide 3 seed beads onto the middle of wire, thread both wires to a drop glass bead;
2nd, add 4 seed beads to each wire again, cross both wires to an abacus glass bead and tighten wires.

Step 2: Make the first beaded flower for the earrings

1st, slide a seed bead and an abacus bead onto one wire, add 5 seed beads to the wire again, pass the wire back to the abacus glass bead and tighten wires;

2nd, add a seed bead and an abacus bead again, and then repeat process 3rd one time;

3rd, repeat process 3rd and 4th to make the other wire as the same;

4th, add a seed bead onto each wire, and cross both wires to an abacus glass bead and tighten wires;
5th, add 2 seed beads onto each wire again, cross both wires to a seed bead and tighten wires.

Step 3: Make the second beaded flower for the earrings

1st, add a seed bead to each wire, cross both wires to a seed bead and tighten wires;
2nd, add 2 seed bead onto each wire again, cross both wires to an abacus glass bead and tighten wires;

3rd, make the second flower in the same method.

Step 4: Finish the beaded flower earrings patterns

1st, slide 2 seed beads onto each wire, cross both wires to another seed bead and tighten wires;

2nd, conceal the wires by passing the beading path;
3rd, attach an earring hook to the beaded flower.

So far, the beaded flower earrings patterns are done! They are so simple but beautiful, are they? Now, you must have known how to make beaded earrings tutorial! Just make a unique pair of beaded flower earrings for your own or send to your close friends.

Link Source:http://lc.pandahall.com/articles/2295-how-to-make-beaded-flower-earrings-tutorial-with-simple-beading-techniques.html

Share this if you love it:

How to Make a Simple Crystal Bracelet with Ribbon for Beginners

In today jewelry making video, we will show you a easy crystal ribbon bracelet made with some blue crystals, yellow seed beads and end with yellow organza ribbon. This simple beaded bracelet tutorial is very suitable for beginners, so join me to have a try!

Share this if you love it: