PandaHall Tutorial on Wire Wrapped Cute Rabbit Necklace

Today, let’s make a cute rabbit necklace. Materials we need are as follow, are you ready?

10 mm Pink Pearl Beads 

4 mm Glass Pearl Beads 

0.3 mm Copper Jewelry Wire

0.5 mm Copper Jewelry Wire

Iron Cable Chains

Iron Jump Rings

Silver Lobster Claw Clasps

Jewelry Pliers Set

Firstly, take out a piece of 0.5 mm copper wire, form a half circle around the pink pearl.

Curve the rest wire into two waves, which are similar to the ears of rabbit;

Put the pearl into the half circle, tighten the wire, cut off redundant wire and form a circle on both ends.

Then, use 0.3 mm copper wire to connect both sides, thread through the hole in bottom and string the pink pearl.

The copper wire keep getting caught around “ears”, thread through 4mm pearl, make a knot.

Repeat these performances to other side. Trim the wire by pliers.

Finally, connect the jump ring with necklace cable chain and pendant, connect lobster claw clasps with chain.

Ta-Da, wire wrapped cute rabbit necklace is accomplished!!!

Looking for more jewelry making tutorials, welcome to visit PandaHall.com and see you next time!

INS: https://www.instagram.com/pandahallbeads/

Youtube: https://www.youtube.com/user/PandaHallVideo

Share this if you love it:

PandaHall Idea on Blue Beaded Bracelet

Materials Needed:

6mm Colorful Jade Beads
2mm Blue Round Seed Beads
2mm Yellow Round Seed Beads
4x4mm Blue Bicone Glass Beads
Silver Lobster Claw Clasps
Silver Iron Jump Rings
0.2mm Clear Nylon Wire
Flat Nose Pliers
Scissors

Try making a bracelet with glass beads, jade beads and seed beads. It’s easy to customize with your favorite colors. Let’s get started!

String six blue seed beads, thread through the last blue bead to make a bead circle. Make a knot, cut off one end.

String four yellow seed beads, thread through the last three yellow seed beads we just added to make a circle.

String a jade bead and a yellow seed bead. String three yellow seed beads, thread through the yellow seed bead next to the jade bead.   

String nine blue seed beads, thread through the three yellow seed beads next to the blue bead circle.

String nine blue seed beads, thread through the two yellow seed beads as picture shows.

String a jade bead and four yellow seed beads, thread through these yellow seed beads we just added.

Follow the previous steps to add blue circles to surround the jade beads. Continue adding jade beads and seed beads. Stop when the length is enough.

Move the clear wire to the position of the blue seed bead as picture shows, start to add beads between bead circles, until the two sides of this bracelet are finished.

Use the jewelry pliers to pull open the jump rings, attach the jump rings and a claw clasp to the bracelet. A charming bracelet is finished.

Do you think you can finish this bracelet alone? It is very easy and you just need to follow the tutorial then you get a pretty bracelet. Welcome share your ideas with us any time. Looking for more jewelry beads and findings? please visit PandaHall!

Share this if you love it:

How to Make Simple Beaded Bracelet

Today’s topic is delicate beaded bracelets. The bracelet I’m gonna show you guys is easy to make. After mastering the beading skills, you can choose your favorite colors and beads you like to make different bracelets.

Materials Needed:
2x2mm Silver Seed Beads
8x6mm LightGrey Glass Beads
3mm White Acrylic Beads
Alloy Lobster Claw Clasps
Silver Iron Jump Rings
0.2mm Clear Nylon Wire
Flat Nose Pliers
Round Nose Pliers
Needles
Scissors

String seven seed beads, thread through the last bead to make a bead circle.
String four seed beads, a glass bead and four seed beads, thread through the last seed bead.

String nine seed beads, thread through the glass bead.
String an acrylic bead, thread through the nine seed beads at the left in order.
String an acrylic bead, thread through the five seed beads at the right.

String four seed beads, a glass bead and four seed beads. Thread through the middle seed bead.
Thread through the four seed beads at the top left and the glass bead we just added.
String nine seed beads, thread through the glass bead from above.
Follow the previous steps to add acrylic beads between the seed beads, to make a complete bead circle.

Continue beading, stop when the length is enough.
Use jewelry pliers to pull open jump rings, attach the jump ring and a claw clasp to the bracelet. A charming crystal bracelet is done.

How do you think of this beaded bracelet? Which is perfect for beginners to practice. And it’s easy to customize according to personal style. Have a try! And welcome to share your ideas with us. If you are looking for some jewelry findings, please visit PandaHall.

Share this if you love it:

PandaHall DIY Jewelry Tutorial on Ocean Style Necklace

Have you got some summer jewelry ideas? Do you like ocean style jewelry? Today’s PandaHall tutorial on how to make a pendant necklace with glass beads and pearls is a wonderful choice for you!

Materials we need:
6mm glass pearl beads(Dark blue/blue/light blue/white)
6mm faceted glass beads(Light blue / blue/ white)
6mm clear glass beads
Shell charms
Tibetan style starfish pendants
Silver iron jump rings
Lobster claw clasps
2mm crimp beads
0.38mm tiger tail wire
Brass Bead Tips
Silver iron cable chains
Jewelry pliers

Step 1: Thread these glass beads onto the wire and fix them

Thread the wire through one knot cover and a crimp bead.
Use the flat nose pliers to flatten the crimp bead, fold the excess part of the wire, clamp it and the clamp bead together. Cover this part and use the flat nose pliers to fasten it.
Start beading. As the picture shows, string beads of different colors onto the wire in order.
Repeat beading according to the sequence.
After we finished beading, follow the previous steps, to make the other ending part.

Step 2: Make the beaded links with the pearls and eye pins

Take one link as an example to explain how to operate.
Thread a eye pin through a dark blue pearl bead
Use the flat nose plies to fold the eye pin and diagonal side cutting pliers to cut off the excess part of the eye pin.
Use the round nose pliers to make a loop. A simple pearl bead link is finished.
Keep making pearl bead links one by one using the same method.

Step 3: Make pendants

Connect these beaded links to the glass bead strand. (Use pliers to pull open the loops of these links, after connecting two parts, use pliers to close the loops)
Start adding shell charms and starfish pendants.
Use round nose pliers and flat nose pliers to pull open jump rings, thread these pendants and charms.
Connect these pendants and charms to the pearl links.

Step 4: Finish the ending part

Use pliers to pull open jump rings, then connect cable chain, necklace main part and the heart shape claw clasp.
Tutorial ends here.

Wow, this ocean style necklace looks so charming! I think it suits summer so much! It must be super popular among stylish girls! And it’s super easy to make too. How do you like it? Are you interested in PandaHall tutorials? If yes, hope you enjoy yourself and have a nice try~

Share this if you love it:

PandaHall Tutorial on How to Make a Summer Beaded Bracelet with Glass Beads

Here is a simple beaded bracelet. Wearing a beaded bracelet on your wrist will make you feel cool on the hot summer. There are many beaded bracelets making tutorials on our website, and you can find them at Inspiration Projects. In this tutorial, I will show you how to make this bracelet. Hope you like it. In the hot summer, what is better for you than a beaded bracelet? Or if you prefer anklets, you can also diy a simple beaded anklet. In addition, during jewelry making, you can really have much fun.

Materials needed: green glass beads, round silver seed beads, transparent fishing wire, silver jump rings and claw clasps, and the jewelry pliers.

Step 1: string four glass beads and seed beads, separate glass beads and seed beads.
Step 2: thread through the last glass bead to form a circle.
Step 3: as the picture shows, firstly add three seed beads, then thread through the seed bead to form a new circle.

Step 4: string four glass beads and three seed beads onto the wire. Thread through the seed bead. We made two bead circle.
Step 5: string three seed beads, we start adding seed beads to the side part.

Step 6: we finished the basic pattern of this bracelet, then we repeat the beading steps. At last, add a claw clasp and a jump ring to the bracelet.


How do you like beaded bracelets? Do you want to own one? It’s an easy making idea and I’m sure you can finish making in a short time. And there are more crafts ideas in PandaHall.com, if you are interested, welcome to visit.

Share this if you love it: