Beach themed charm bracelet DIY

I love how the charms move when you wear a charm bracelet but for this one I wanted to incorporate beads too. 


Here’s what I’m using :

-Aluminium chain
-A few glass beads
-A lobster clasp
-2 metallic beads
-Jewelry stringing wire
-crimp beads
-Various beach themed charms and beads _DSC0398First choose the charms you want to use and add jumprings to them. If you use any beads add headpins and jumpring._DSC0399Measure your wrist and add a couple of cm to it. Cut a piece of chain approximately half that size and add the lobster clasp._DSC0400edited

Now using crimp beads, attach the chain to a piece of stringing wire.


String the beads and secure using another crimp bead.


Finally attach all the charms on the chain.


So what do you think of my new beach-themed charm bracelet? Would you try to make your own?



Share this if you love it:

Colorful Wrapped Summer Bracelet with Adjustable Closure!

Bracelet season is officially here! So let’s make an easy and fun summer bracelet full of color!

Materials :
-Cotton cord for the base of the bracelet (use a thick one, I used 2mm)
-Various thin (1mm or less) cotton cords in bright colors for the wrapping
-Fish connector charm
-2 metallic beads with big holes
-1 eyepin
-An evil eye bead

colorful bracelet diy

First measure the cord you’ll need for your wrist and double that size. Cut the cord in two equal pieces and slide each piece to each one of the holes of your connector charm.


Now take a small piece of one of the colorful cords, make two tight knots and wrap it around the base cord a few times like you see in the picture.

colorful bracelet diy3

Repeat this process with another color like this

fish bracelet diy4

Now do the same with two more colors for the other side of the bracelet. Cut off any excess cord and burn the edges so it doesn’t fray.

colorfull bracelet diy5

Now bring both ends of the base cord together to make an adjustable macrame closure. Take a piece of the colorful cord and first tie a knot over the two ends.

Next, bring right cord under middle cords and over left cord like this.

macrame closure diy 2

Pull tight and the first knot will look like this

macrame closure diy3

Next, bring left cord under middle cords and finally over right cord. Pull tight.

macrame closure diy4

Repeat this process for a few knots more and when you are satisfied with the closure, cut off any excess cord and burn the edges. It will look like this :

macrame closure diy3

Slide the metallic beads on each side and make knots so that the adjustable closure doesn’t come off.


Finally with the help of the eyepin, attach the evil eye bead too.


That’s it! Your colorful summer bracelet is ready! Feel free to get addicted and make a bunch of them!

colorful bracelet fish2edited

Share this if you love it:

DIY Multi Strand Chain Summer Bracelet!!!


Isn’t it really annoying to create jewels and to always have these small chain scraps that are not able to use them in any other project? I have to admit that I have a small collection of such scraps and I just find a way to use them again for a bracelet! Let’s create it together!


Materials for Multi Strand Chain Bracelet:
Chain ( I have used three different types of chains)
– Jump Rings
Gold Toggle Clasp
– Head Pin
– Millefiori Bead
– Plier Set


Step 1: First choose what chains are you going to use. I have used a gold plated chain, a turquoise and gold chain and a handmade beaded chain. Cut three pieces (one from each) in the same length.


Use a jump ring in each end of every chain and connect them to a larger jump ring.


Step 2: Finish the bracelet by using your favorite type of lobster (I have use a gold plated toggle clasp). The main body of your jewel is ready. You can enjoy it as it or add a small beautiful detail!


Step 3: This is mandatory, but it will make your bracelet unique. Just use a Millefiori bead, pass it in the head pin and create a loop. Connect it with a jump ring with one of your chains!


IMG_3991Ready and full of blue! Summer is almost here!!!

Happy Crafting!

Share this if you love it:

How to Make a Spring Rhinestone Bracelet

Spring is here and it’s the perfect opportunity to bring some color to our jewelry! Let’s see how you can make a beautiful spring rhinestone and suede bracelet with a pop of colour!


Materials :
-rhinestone cup chain
-suede cord
-2 jumprings
-1 cord crimp-ending
-waxed cord


First off, measure your wrist and cut a piece of suede cord twice that size. Tie one end of the cord forming a loop like this. Take a big jumpring and attach it to that loop. That’s one end of your bracelet.


Now take the piece of rhinestone chain and place it in the middle. You are going to attach the rhinestone to the suede cord using the wax cord. Now that you have determined were the chain will start, make a double loop there with the waxed cord.


Continue by wrapping the waxed cord over the rhinestone and the suede and finish off with a double loop. Use a dap of glue to hide the finishing knots.


With your flat-nose pliers attach the ending on the other side of the bracelet.


Finally using a jumpring attach the lobster clasp and your bracelet is ready!


Wear it and enjoy spring!


Share this if you love it:

How to Make a Cool Multi-strand Leather Bracelet

It’s fun to wear a lot of bracelets together but when you are in a hurry it’s great to have a bracelet that you can wear in a minute and looks like 3 bracelets together! Here’s a way to make a leather multi-strand bracelet.


Materials :
-Flat leather cord
-2 x endings that fit the flat leather
-Black cord
-2 x endings that fit the black cord
-1 x metallic bead with big hole
-Approx. 40 x 4 mm pearl beads
-Jewelry stringing wire
-Crimping beads
-2 jumprings
-1 x magnetic clasp


First take the flat leather cord, measure it to your wrist and cut a piece. Using your flat-nose pliers, press the endings on each side of the leather.


Now take the black cord, measure it too and slide the metallic bead in the middle.


Finish this part of the bracelet by pressing the endings for this cord on both sides.


Next, take a piece of stringing wire, slide a crimping bead and bring back the wire into the crimping bead forming a loop. Secure the crimp by pressing it tight.


Now thread the pearls and secure them by using another crimp bead.


Now you have three separate parts of the bracelet. Using 2 jumprings attach them all to the magnetic clasp.


That’s it! Wear it and be happy!


Share this if you love it: